Input Mode; Customizing Sound Fields - Sony HT-DDW670 Operating Instructions Manual

-- INPUT MODE
Yuu can switch the audio input mude for
compuuenls which have digilal audio inpul
.jacks.
1
Press input buttons to select the input.
2 Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
• AUTO IN
Gives priority lo digilal signals when Ihere are
bulh digital and analog cunneclions. 11 Ihere
are no digilal signals, anah)g is selecled.
• COAX IN
Specil'ies Ihe digilal audio signals inpul lo lhe
DIGITAL COAXIAL inpul jack.
• OPT IN
Specifies Ihe digilal audio signals inpul lo lhe
DIGITAL OPTICAL inpul ,jacks.
• ANALOG
Specifies the anah)g audio signals input tu the
AUDIO 1N (L/R)jacks.
Notes
• When signals witb
a salnpling
frequency of more
Ihan 48 kHz ix input, the lone and sound field cannot
be used.
• Some audio input modes may be dilnlned depending
on the inpul. This means Ihal Ihe selected input ix
unavailable.
By adjusting the LEVEL menu. yuu can
custumize the sound fields tu suit your particular
listening situation.
Note on the displayed items
The setu 1)items you can adjust in each menu vary
depending on the sound fiekl. Certain setup parameters
mW be dimmed in the display. This means that the
selected parameter ix either unavailable or fixed and
unchangeable.
Adjusting the LEVEL menu
You can adjust the halance and level of each
speaker. These settings are applied to all suund
fields except for efli_ct level parameter. The
eflect level parameter settings are stored
individually for each suund field.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
Press MAIN MENU repeatedly to select
"<LEVEL>".
3 Press < or _ repeatedly to select the
parameter you want to adjust.
Fur details, see "LEVEL menu parameters"
below.
While monitoring the sound, press + or
- repeatedly to select the setting you
want.
The setting is entered automatically.
5 Repeat steps 3 and 4 to adjust the other
parameters.
LEVEL menu parameters
The initial setting is underlined.
• !_i i_ BAL. L/R XX
(Front speaker balance)
Initial setting: BALANCE (0)
Lets you
a(liust
the balance between front left and right
speakers. You can a_liustin the range of BAL. L (+1 to
+8), BALANCE 10), BAL. R (+1 to +8) in 17 steps.
28G8