Sony HT-DDW670 Operating Instructions Manual page 13

Installing the speakers on the
wall
You can install your front and surround speakers
<)i1the wall.
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
more than 4 mm
(5/32 inch)
4
more than 25 mm (1 inch)
Notes
• Use screws that are suitable for Ihe wall malerial and
slrenglh. As a plasler board wall is especially fragile,
altach the screws securely Io a beam and faslen tbem _:_
te Ihc wall Install Ihe speakers on a verlical and flat
wall where reinforcement is applied.
(.Q
• Conlact
a screw shop or installer regarding
the wall O_
material or screws le be used.
• Sony is not responsible
for accident
or damage
_,
caused hy improper inslalb_tien, insufficienl wall e_
slrength or iml_roper screw installatien, natural
calamily, elc.
2
Hole on the back of the speaker
Fasten the screws to the wall. The
screws should protrude 5 to 7 mm (7/32
to 9/32 inch).
3
Hang the speakers on the screws.
Hole on the back of the speaker
f,,
* 4.6 mm
_ (3/16 inch)
¢ _- lOmm
(13/32 inch)
13G8