Run Circuit - Cub Cadet 2000 Series Professional Shop Manual

2000 Series Tractors

Run Circuit

With the key switch in the RUN position, the A1 termi-
nal sends power to:
• the afterfire solenoid
• the windings of the PTO relay
• the PTO switch C-COM terminal
• the RMC module "A1 pwr" terminal
• the headlights
• the system monitor
See Figure 7.20.
This is identical to what happens with the key in the
START position, except that the circuit that actually spins
the starter motor is not energized.
106
Figure 7.20