Table of Contents
Advertisement
Place a call. Tap the Mobile Account line key first, and then place a call or multiple calls to the mobile contacts.
Answer a call. An incoming call to your mobile phone is also shown on the phones, you can answer the call on the
phone. The phone will firstly match the contacts in the mobile contacts directory to present the caller identity.
During the call, you can hold/resume, mute/unmute or end the call on the phone.
Configuring the phone audio feature
After syncing the mobile contacts to your phone, the phone acts as a hands-free device for your mobile phone. The call is
made through your mobile phone, but the audio is present and the call control is done by the phone.
If a Bluetooth headset is connected to the phone, you can choose to answer a call using the Bluetooth headset.
Procedure
1.
Do one of the following:
Swipe down from the top of the screen and long tap the Bluetooth icon.
Go to More > Settings > Basic Settings > Bluetooth.
2.
Select
after the desired Bluetooth device name.
3.
Turn on Phone audio.
4.
Save the change.
Configuring the Media Audio Feature
If a Bluetooth headset is connected to the phone, you can enable the media audio feature to
stream the audio from IP phone to Bluetooth headset. The Bluetooth headset acts as the player for the SIP phone.
Procedure
1.
Do one of the following:
Swipe down from the top of the screen and long tap the Bluetooth icon.
Go to More > Settings > Basic Settings > Bluetooth.
2.
Select
after the connected Bluetooth headset name.
3.
Turn on Media audio.
4.
Save the change.
Changing your phone's Bluetooth name
You can change the Bluetooth name for your phone to identify your phone to other Bluetooth devices. By default, the phone
is identified as "Yealink-T64-LTE" by other Bluetooth devices.
Before you begin
Make sure that the Bluetooth mode is activated.
Procedure
1.
Do one of the following
Swipe down from the top of the screen and long tap the Bluetooth icon.
Go to More > Settings > Basic Settings > Bluetooth.
2.
Select Edit My Device Information.
3.
Enter the desired name in the Device Name field.
4.
Save the change.
Disabling Bluetooth Device Discovery
User guide
63
Advertisement
Table of Contents
