Connecting Your Phone And/Or Fax To The Wireless Home Phone - Verizon Wireless Home Phone User Manual

2. Press the power button on the back of the Wireless Home Phone to turn on the device.
3. As the device boots up, you'll see the Verizon logo on the LCD display, followed by a Home
screen like the one below:
4. Check the signal strength indicator (
move the Wireless Home Phone to an alternative location that provides a stronger signal. The
device will not operate properly when the signal strength is at one bar.
2.3

Connecting Your Phone and/or Fax to the Wireless Home Phone

The Verizon Wireless Home Phone enables landline telephones to place phone calls and fax
machines to transfer faxes over an LTE connection. The device comes with two phone ports.
Typically, one is used for a phone and the other is used for a fax machine. Follow the steps below
to connect the Wireless Home Phone to your telephone and/or fax machine.
1. Complete the steps in section 2.1 and 2.2.
2. Unplug your phone or fax machine from the wall jack.
3. Using the connector previously plugged into a wall jack, plug the phone cord of your phone
into one of the RJ11 ports on the Wireless Home Phone. Alternatively, you may use the RJ11
cable that comes with the Wireless Home Phone to connect the device with your phone/fax
machine.
) and make sure at least two bars are lit. If not,
8