Security Tips; Servicing - Profi-pumpe OASIS 501R-1 Operating Instructions Manual

7. SECURITY TIPS

l Obey absolutely valid regulations on the electrical security
l Never run pump dry
l Pumping inflammable, as well as all other aggressive liquids is prohibited
l Pay attention to the medium max. 40°C
l Any altering of the product itself or changing of the components is forbidden.
l With longer unused times, clean the pump, wash it out with clear water, dry and store it at room temperature
l Do not connect the pump to any AC voltage power directly, it's ONLY for DC Voltage power.
l Operate the pump in freshwater or saltwater only (never above 50°C), especially keep it away from flammable liquids.
l All solar panels are very sensitive, protect it before all against external mechanical influences (shock, vibration, etc.)
The manufacturer explains:
l To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the instruc-
tionsin this book.
l To reject every responsibility for the damages which originate from the improper use of the pump

6. SERVICING

If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or filter cribs.
Kindly note the pump can be opened by pressing down at the bottom of the filter housing. To clear the impeller, open the
pump housing at the front by sliding up the front plastic cover.
For models: OSLO 300 LIGHT-2
OSLO 300-2 LIGHT + Remote
The solar module should only be cleaned
with soft tissue or propriety glass
cleaning solution.
OASIS 501R-1
For models:
OASIS 801R-1
OASIS 1601R-1
OASIS 2001-1
The solar module should only be cleaned
with soft tissue or propriety glass cleaning
solution.
7.1 The following controls should be carried out regularly:
Cleanness of the medium (no mud, see technical data)
Moreover, the pump should be emptied with danger of frost, be washed out with clear water and stored dry.
Pull off filter cover as shown
Open impeller cover, then
impeller can be easily removed
Pull off filter cover as shown - remove filter
and pump motor
Open impeller cover, then impeller can be easily
removed. Rinse all parts thoroughly in water.
English 5
Remove filter and rinse in water
Rinse all parts thoroughly in water