Operation - Profi-pumpe OASIS 501R-1 Operating Instructions Manual

3. OPERATION

Read through the instructions and download the latest necessarily given from the website.
1. Unpack all components carefully
2. Mount the solar panel (see illustration). Remove the protective film from the solar panel (if any).
3. Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar panel is shaded.
Adjust the solar panel angle to maximise the amount of solar energy collected.
4. Connect the pump, panel and the LED-Light on the battery (see illustration). Check whether the flow is fully open (or else
promoted little or no water).
Solar Socket
(Only for models with two solar panels)
LED Socket Pump Socket
English 3
Summer 0°- 30°
Spring/Autumn 30°- 60°
IMPORTANT!
Slightly twist the
connectors, when
pushing