Operation And Function; Performance - Profi-pumpe OASIS 501R-1 Operating Instructions Manual

4 English

5. OPERATION AND FUNCTION

5.1 For models: OASIS 501R-1 , OASIS 801R-1, OASIS 1601R-1, OASIS 2001-1
Water Flow Adjust: You can adjust the pump water flow by remote control (Press „B" button), there are totally 4-level water
flow to fit different size fountain needs. Also, if your remote control lost by accident, you still can turn on/off, adjust pump
water flow by related buttons on the control box.
Note: Although there maybe some initrial charge in the battery, we recommend fully charging it before first use.
Turn off the solar pump for 1-2 sunning days to ensure the battery is full charged before first time use.
5.2 For models: OSLO 300LIGHT-2, OSLO 300-2 LIGHT + Remote
Sol.Mode LIGHT ON (GREEN) - SOLAR MODE: The pump is running by solar power.
Bat.Mode LIGHT ON (GREEN) - BATTERY MODE: The pump is running by battery power.
Charging LIGHT ON (YELLOW) - The battery is charging by solar panel.
Low Bat. LIGHT FLASHING (RED) - LOW BATTERY POWER - System will shut off the pump,
Sol.Mode AND Bat. Mode - Lights will be OFF.
l Press power ON/OFF button to open the system. Pump will startup by default Battery mode first, Bat.Mode LIGHT ON.
System will detect solar output every 15 seconds.
If solar output is good enough, system will automaticallyswitch to solar mode Sol.Mode Light ON.
If solar output is not enough, system will automaticallyswitch to battery mode Bat.Mode Light ON.
l Press pump ON/OFF: to turn ON/OFF. The pump after open the system.
l Press light ON/OFF: to turn ON/OFF the LED light ring. NOTE: The LED light ring only works, when day goes dark.
l When battery power is low, the system will automatically shut off the pump to protect the battery Low Bat. Light will be
on in this case. The pump can not work until the battery is re-charged Low Bat. Light off. The re-charging time should
depend on sunlight conditions.

6. PERFORMANCE

The performance of the pump depends on the orientation of the solar panels toward the sun and the intensity of. The max.
Data obtained under optimal conditions. A feature in the shade or on cloudy days can not be guaranteed. In models with
battery operation depends on the function of the battery is charged.
1. Press „POWER ON/OFF" button to open the system.
2. Press „PUMP ON/OFF" button on control box or „A" button on remote
control (model with a remote control), to turn on / off the pump.
3. Press „WATER FLOW" button on control box or „B" button on remote
control (model with a remote control), to adjust the pump water flow.
Note: The remote control is valid
within 10 meters distance!