Siemens WM14N2M4FG Manual page 47

Disturbance
Spin program
does not start.
Rushing, zi-
ringing noise.
Loud noises during
during the spin.
rattling noises,
Rattling in the drain
pump.
slurping, rhythmic
strange sucking noise.
Wrinkling.
Cause and troubleshooting
Make sure the drain pipe and water drain hose are
▶
not kinked or pinched.
Unbalance control system stopped spinning due to
uneven distribution of laundry.
Redistribute the laundry in the drum.
▶
A notice:If possible, place large and small items of
laundry together in the drum. Different sized items of
laundry are distributed better when spinning.
Start the programCentrifuge / Essorage.
▶
Water is flushed into the detergent drawer under
pressure.
No error - normal operating noise.
▶
Device is not aligned correctly.
→
"Aligning the device", page 17
▶
Device feet are not fixed.
Fix the device feet.
▶
→
"Aligning the device", page 17
Transport locks have not been removed.
→ "Remove transport locks", page 14 .
▶
A foreign body has gotten into the drain pump.
→
"Cleaning the drain pump", page 36
▶
The drain pump is active and the suds are pumped
out.
No error - normal operating noise.
▶
Spin speed is too high.
Set a lower spin speed for the next wash cycle.
▶
Load quantity is too high.
Reduce the load size the next time you wash.
▶
Unsuitable program set for the textile type.
Select programs suitable for the type of textile.
▶
Troubleshootingde
47