Troubleshooting - Siemens WM14N2M4FG Manual

Table of Contents

Advertisement

de

Troubleshooting

1
8 Troubleshoot problems
K You can fix minor problems with your device yourself. Use that
Troubleshooting information before contacting customer service. This way you
avoid unnecessary costs.
WARNING
Danger of electric shock!
Improper repairs are dangerous.
Only trained specialist personnel may carry out repairs on the device.
Only original spare parts may be used to repair the device.
If the power cord of this device is damaged, it must be replaced by the
manufacturer or its customer service or a similarly qualified person to avoid
hazards.
Disturbance
The display has gone
out andStart/pause
ze / Départ/Pause
flashes.
"E:30 / -80"
40
Cause and troubleshooting
Energy saving mode is active.
Press any key. aThe display lights
up again.
Drain pipe or water drain hose is blocked.
Clean the drain pipe and water drain hose.
Drain pipe or water drain hose is kinked or pinched.
Make sure the drain pipe and water drain hose are
not kinked or pinched.
Water drain hose is connected too high.
Mount the water drain hose at a maximum height
of 1 meter.
Unauthorized extension installed on the water drain
hose.
Remove any unauthorized extensions from the water
drain hose.
"Connecting the device", page 15
Drain pump is clogged.
"Cleaning the drain pump", page 36
Pump cover is not assembled correctly.
Assemble the pump cover correctly.
Pump cover is not screwed in completely.

Advertisement

Table of Contents
loading

Table of Contents