Siemens WM14N2M4FG Manual page 42

Table of Contents

Advertisement

deTroubleshooting
Disturbance
flashes.
shines.
shines.
flashes.
"E:30/-20"
42
Cause and troubleshooting
Voltage control system detects impermissible voltage
undershoot.
No fix possible.
A notice:When the power supply has stabilized, the
program continues to run normally.
If the voltage is not reached, the program may be
extended.
No fix possible.
If the voltage is not reached, the program may be
extended.
No fix possible.
Temperature is too high.
Wait until the temperature has dropped.
→ "Cancel program", page 32
Water level is too high.
Choose a suitable pumping program.
→ "Programs", page 24
Door is not closed.
Close the door.
Laundry is jammed in the door.
Remove any trapped laundry.
Drum cleaning required.
"Cleaning the drum", page 35
Detergent dosage is too high.
The next time you wash the same load, reduce the
amount of detergent.
Added additional water.
Do not add additional water to the device during
operation.
Solenoid valve defective.
Call customer service.
"Customer Service", page 51

Advertisement

Table of Contents
loading

Table of Contents