Siemens WM14N2M4FG Manual page 16

deSetting up and connecting
Connect the water inlet hose to the
1.
device.
Connect the water inlet hose to the
2.
tap (26.4 mm = 3/4").
Open the tap carefully and check
3.
whether the connection points are
tight.
Water drain connection types
The information will help you connect
this device to the water drain.
DANGER!
When pumping out, the water drain
hose is under pressure and can detach
from the installed connection point.
The water drain hose against
▶
unintentional L
16
secure eyelets.
A notice:Pay attention to the pumping
heights.
The maximum pumping height is
100 cm.
siphon
Bathroom sink
plastic pipe
with rubber sleeve
or drain
Connect the device electrically
A notice:Your home electrical
installation for this device must
comply with local legal and safety
regulations and should include a
residual current circuit breaker.
Plug the power plug of the device's
1.
power cord into a socket near the
device.
The connection data for the device
can be found in the technical data
→ Page 53 .
Check that the power plug is firmly
2.
seated.
The connection
place with one
Hose clamp
(24-40 mm)
chern.
The water drain
running hose with
a manifold
fix and secure
chern.
→
"Accesories",
Page 29
The water drain
running hose with
a manifold
fix and secure
chern.
→
"Accesories",
Page 29