Table of Contents
Advertisement
19.2 Make the device frost-
proof
If the device is located in a room
where there is a risk of frost, e.g. in a
holiday home, empty the device
completely.
Empty the device.
▶
→ "Transporting the device",
page 53
19.3 Transporting the device
To prevent damage to the device,
empty the device before transport.
Remark:To prevent residual water
from entering the controls and
damaging the device, only transport
the device in an upright position.
Remove dishes from the appliance.
1.
Secure loose parts.
2.
Turn on the device.
3.
→ Page 34
Select the program with the
4.
highest temperature.
→ "Programs", page 19
Start the program.
5.
→ Page 35
To empty the appliance, cancel the
6.
program after approx. 4 minutes.
→ "Cancel program", page
35
Turn off the device.
7.
→ Page 35
Close the tap.
8.
To remove the remaining water
9.
from the device, disconnect the
inlet hose and allow it to drain.
Transport, store and dispose of
19.4 Disposal of your old
device
Valuable raw materials can be reused
through environmentally friendly
disposal.
WARNING
Risk of health hazard!
Children could become trapped in the
device and endanger their lives.
In the case of discarded appliances,
▶
unplug the power cord from the
socket, then cut the power cord and
damage the lock of the appliance
door in such a way that the
appliance door no longer closes.
Unplug the power cord from the wall
1.
socket.
Cut the power cord.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information about
current disposal methods from your
dealer and your municipal or district
council office.
This device is marked
in accordance
ming with the European
Directive 2012/19/EU on
waste
electrical and electronic
equipment (waste
electrical and electronic
equipment - WEEE).
The directive sets the
framework for take-back
valid in the EU
and processing of old
equipment.
53
Advertisement
Table of Contents
