Table of Contents

Advertisement

Quick Links

Dishwasher
SN63E800BE
en
User manual
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens SN63E800BE

  • Page 1 Dishwasher SN63E800BE User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    Table of contents Safety ..........   4 Folding prongs ....... 22 General information...... 4 Knife shelf........ 23 Intended use........ 4 Basket heights........ 23 Restriction on user group.... 4 Before using for the first time ..   23 Safe installation ........ 5 Performing the initial configura- Safe use ........... 6 tion.......... 23 Damaged appliance ...... 8 Risk to children ........ 9...
  • Page 3 Customer Service......   57 Terminate programme.... 33 Product number (E-Nr.), produc- Switching off appliance .... 33 tion number (FD) and consecut- Basic settings........    34 ive numbering (Z-Nr.) ..... 58 Overview of basic settings ..... 34 AQUA-STOP guarantee .... 58 Changing basic settings.... 36 Technical specifications....   59 Home Connect ......
  • Page 4: Safety

    en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡...
  • Page 5: Safe Installation

    Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions.
  • Page 6: Safe Use

    en Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-ap- proved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury.
  • Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
  • Page 8: Damaged Appliance

    en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges.
  • Page 9: Risk To Children

    Safety en Risk to children Follow the safety instructions if there are children in your home. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶...
  • Page 10 en Safety WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. ▶ Keep children away from the appliance when open. WARNING ‒ Risk of suffocation! Children may become trapped in the appliance and suffocate. ▶...
  • Page 11: Preventing Material Damage

    Preventing material damage en ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,...
  • Page 12: Environmental Protection And Saving Energy

    en Environmental protection and saving energy ¡ Unsuitable cleaning agents may Saving energy damage the appliance. If you follow these instructions, your Do not use a steam cleaner. ▶ appliance will use less electricity and So as not to scratch the finish ▶...
  • Page 13: Autoopen Dry

    Installation and connection en ¡ Installation material autoOpen Dry ¡ Steam guard plate The appliance door opens automatic- ¡ Mains cable ally during the drying phase. This en- ¡ Quick reference guide sures a particularly economical dry- ing result. Installing and connecting the For best drying results wait until the appliance end of programme before unloading...
  • Page 14: Drainage Connection

    en Installation and connection Drainage connection Electrical connection Connect your appliance to drainage Connect your appliance to the power connection so dirty water is dis- supply. charged via the wash cycle. Connecting the appliance to the Installing the drainage connection electricity supply Consult the installation instructions Notes supplied for the steps required...
  • Page 15: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"...
  • Page 16: Controls

    en Familiarising yourself with your appliance "Detergent" → Page 27 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 21 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 24 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
  • Page 17 Familiarising yourself with your appliance en 3 4 5 6 "Switching on the appliance" → Page 32 ON/OFF button and reset button "Switching off the appliance" → Page 33 "Terminating the programme" → Page 33 "Programmes" → Page 18 Programme buttons "Water softening system" → Page 24 Special salt refill indicator "Rinse aid system"...
  • Page 18: Programmes

    en Programmes Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 19: Information For Test Institutes

    Programmes en Programme Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 20 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Drying household food remnants lightly dried-on.
  • Page 20: Additional Functions

    en Additional functions Press the right programme button. Additional func- → "Programmes", Page 18 tion Press the button for the relevant If you select this additional additional function. function, "automatic door → "Additional functions", Page 20 opening" → Page 34 in Press for approx. 3 seconds. the "o02" setting is deactiv- a The selected programme and the ated.
  • Page 21: Top Basket

    Features en The basket can then slip down Top basket slightly. Arrange cups and glasses in the top Raise or lower the basket evenly to basket. the right level. → "Basket heights", Page 23 Knife shelf Check that the basket is level on You can adjust the height of the top both sides.
  • Page 22: Cutlery Basket

    en Features Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards.
  • Page 23: Knife Shelf

    Before using for the first time en Push the lever forwards and fold Knife shelf down the prongs ⁠ . Use the shelf for knives and long items of cutlery. To use the prongs again, fold them back up. a The prongs audibly click into posi- tion.
  • Page 24: Water Softening System

    en Water softening system Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 34 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked.
  • Page 25: Special Salt

    Water softening system en Press repeatedly until the right water hardness has been set. The value H04 is set at the factory. To save the settings, press for 3 seconds. Special salt You can use special salt to soften water. Adding special salt Funnel If the special salt refill indicator lights Fill the dispenser right up with spe-...
  • Page 26: Regeneration Of The Water Softening System

    en Rinse aid system To open the basic settings, press Eco 50° programme and the factory for 3 seconds. value of the water hardness is set to 16 - 20°E. a The display shows Hxx. a The display shows ⁠ . Press repeatedly until the dis- Rinse aid system...
  • Page 27: Setting The Amount Of Rinse Aid

    Detergent en Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. Tip: The function of rinse aid is lim- ited with combined detergents.
  • Page 28 en Detergent based bleaching agents are generally Separate detergents used to remove coloured marks, e.g. Separate detergents are products tea or ketchup. that do not contain components other Note: Follow the manufacturer's in- than detergent, e.g. powder deter- structions for each detergent. gent or liquid detergent.
  • Page 29: Unsuitable Detergents

    Detergent en ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡...
  • Page 30: Tableware

    en Tableware Damage to glass and table- ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡ Items of cutlery washer-safe by the and tableware manufacturer.
  • Page 31: Arrange Tableware

    Tableware en To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –...
  • Page 32: Removing Tableware

    en Basic operation If you do not perform any actions Removing tableware on the appliance for 10 minutes, the appliance will automatically WARNING switch off. Risk of injury! Hot tableware can cause burns to the Setting a programme skin. When hot, tableware is sensitive to shock, may crack and can result in To adjust the wash cycle to the soil- injury.
  • Page 33: Starting The Programme

    Basic operation en Press for approx. Starting the programme 4 seconds. Press ▶ Close the appliance door. a The programme has ended when a All displays light up. the display shows "0h:00m". a As soon as the displays are off, the display shows "0h:01m" and Notes the residual water is pumped out.
  • Page 34: Basic Settings

    en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness.
  • Page 35 Basic settings en Basic setting Display text Selection Description EmotionLight E00 - E02 Interior light. ¡ With the setting "E00"m the in- terior light is switched off. ¡ With the setting "E01", the in- terior light can be activated via the ON/OFF button.
  • Page 36: Changing Basic Settings

    en Home Connect Basic setting Display text Selection Description Wi-Fi Cn0 - Cn1 Switch the wireless network connec- tion on or off. Level "Cn0" switches the wireless network connection off. Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 37. The following settings are possible: ¡...
  • Page 37: Home Connect Quick Start

    Home Connect  en The Home Connect app guides you With the help of the Home Connect through the entire login process. Fol- App scan the QR code. low the instructions in the Home Con- nect app to configure the settings. Tips ¡ Please consult the documents sup- plied by Home Connect.
  • Page 38: Remote Diagnostics

    A detailed RED Declaration of Con- Please see the information on data formity can be found online at protection. www.siemens-home.bsh-group.com The first time your appliance is among the additional documents on registered on a home network the product page for your appliance.
  • Page 39: Cleaning And Servicing

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
  • Page 40 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- ¡...
  • Page 41: Filter System

    Cleaning and servicing en Filter system The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out ⁠ . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters.
  • Page 42: Cleaning Spray Arms

    en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ⁠ . Pull up the lower spray arm to re- move.
  • Page 43: Troubleshooting

    Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 44: Error Code / Fault Display / Signal

    en Troubleshooting Fault Cause troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
  • Page 45 Troubleshooting en Fault Cause troubleshooting E:32-00 will light up altern- ately or indicator for water supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks. Restore the power supply. Switch the appliance on.
  • Page 46: Washing Results

    en Troubleshooting Fault Cause troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse.
  • Page 47 Troubleshooting en Fault Cause troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
  • Page 48 en Troubleshooting Fault Cause troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 41 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 41 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
  • Page 49 Troubleshooting en Fault Cause troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 18 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
  • Page 50 en Troubleshooting Fault Cause troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable "Detergent " ▶ → Page 27 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
  • Page 51 Troubleshooting en Fault Cause troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
  • Page 52: Home Connect Problem

    en Troubleshooting Fault Cause troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items.
  • Page 53: Information On Display Panel

    Troubleshooting en Information on display panel Fault Cause troubleshooting Add "Special salt" → Page 25. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶...
  • Page 54: Mechanical Damage

    en Troubleshooting Fault Cause troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door.
  • Page 55: Noise

    Troubleshooting en Noise Fault Cause troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶...
  • Page 56: Clean Wastewater Pump

    en Transportation, storage and disposal Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-...
  • Page 57: Protect Appliance From Frost

    Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 58: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)

    en Customer Service We will always find an appropriate Product number (E-Nr.), pro- solution and try to avoid unnecessary duction number (FD) and con- visits being made by a Customer Ser- secutive numbering (Z-Nr.) vice technician. With any warranty claims, we will You can find the product number (E- make sure that your appliance is re- Nr.), the production number (FD) and...
  • Page 59: Technical Specifications

    Technical specifications en needs to be turned off if you are Capacity 13 place settings away from home for a long period, This product contains light sources e.g. on holiday for several weeks. from energy efficiency class G. These light sources are available as a spare part and should only be replaced by Technical specifications Technical specifications...
  • Page 60 en Technical specifications To file a request, please email to oss- request@bshg.com or send a written request to BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 München, Germany. Reference "OSSREQUEST" The cost of performing your request will be charged to you. This offer is valid three years from the date of pur- chase or at least as long as we offer support and spare parts for the re-...
  • Page 64 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001567498* 9001567498 (000708) 650 V5...

Table of Contents