3.
impressions.
aThe time setting is activated.
Tip:You can deactivate the time
setting by pressing it until "h:00"
appears on the display.
14.5 Start program
Press
▶
aThe program has ended when
down the display "0h:00m"
indicates.
Comments
¡If you want to add dishes
While the appliance is already
running, do not use the tablet tray
as a handle for the upper crockery
basket. This may cause you to
encounter the partially resolved tab.
¡You can already
change by aborting the program.
→ "Cancel program", page
35
¡It is to save energy
appliance switches off automatically 1
minute after the end of the program.
If you open the door immediately
after the program ends, the appliance
switches off after 4 seconds.
14.6 Interrupt program
Remark:If you open the appliance door
when the appliance has heated up, it is
best to leave the appliance door ajar
for a few minutes and then close it. In
this way you prevent overpressure
from developing in the device and the
device door from opening.
Open the appliance door carefully.
1.
.
2.
impressions.
aThe program is saved
and the device turns off.
Press to continue the program.
3.
Close the appliance door.
4.
14.7 Cancel program
To end a program prematurely or
change a started program, you must
cancel the active program.
Open the appliance door.
1.
Approx. Press for 4
2.
seconds.
Close the appliance door.
3.
aThe program is aborted
and is closed after approx. 1 minute.
14.8 Switch off device
Instructions for safe use → Page
1.
10 consider.
Press.
2.
Tip:If you press during the washing cycle
button, the running program is
interrupted. When you switch on the
appliance, the program will continue
automatically.
Service
35