AccuPower APLC4S3A0 Instruction Manual

Rapid charger unit for Lithium-ion and Lithium-polymer rechargeable battery
TECHNICAL SPECIFICATION
Input:
Output:
LED indicator:
Safety Timer: approx. 8 hours
(Timer starts automatically when the battery is connected to the charger).
OPERATION OF THE CHARGER
ATTENTION: The charging instructions of the battery manufacturer must be observed!
1. Connect the battery to the charger.
2. Make sure that the polarity of the Battery is correct.
3. Plug the power cord into an outlet.
LED Indicator:
Red :
Green :
4. When charging is complete, disconnect the power plug from the outlet and disconnect the battery from
the charger.
Do not charge any other batteries with this charger!
Note: Information and contents in this sheet are for reference purpose only. They do not constitute any warranty or representation and are subject to change without notice.
Die Informationen und Inhalte in diesem Blatt dienen nur als Referenz Zweck. Sie stellen keine Gewährleistungen oder Zusicherungen dar, und können jederzeit ohne vorherige
Ankündigung geändert werden.
Instruction Manual: Li-Ion C
INSTRUCTION MANUAL
packs with 4 cells (14.4V or 14.8V)
100 – 240V AC 50-60Hz max 0.8A
Worldwide use thanks to wide-range input
16.8V DC max 3.0A
Green: Standby / charge completed
Red: Battery is charging
Charging
Flashing: Error
Battery fully charged
harger
APLC4S3A0
1/2
APLC4S3A0