Table of Contents
Advertisement
1/8
Operating instructions IQ328
Please read these Operating instructions carefully before using the charger.
We thank you that you have decided to purchase our intelligent fast chargers IQ-328.
With this battery charger, you have the possibility to recharge batteries optimal
discharge, refresh and test the Mignon (AA) and Micro (AAA). The LCD display gives
you a good overview of each battery.
Intelligent fast charger IQ328
"Easy to use"
Please consider to get the safety and care instructions in this manual to this charger
efficiently and safely.
Supplied with:
• battery charger IQ328
• Power Supply
• Operating instructions
Advertisement
Table of Contents
Related Manuals for AccuPower IQ-328
Summary of Contents for AccuPower IQ-328
- Page 1 Operating instructions IQ328 Please read these Operating instructions carefully before using the charger. We thank you that you have decided to purchase our intelligent fast chargers IQ-328. With this battery charger, you have the possibility to recharge batteries optimal discharge, refresh and test the Mignon (AA) and Micro (AAA). The LCD display gives you a good overview of each battery.
- Page 2 Important notes: 1. The charger IQ-328 is only for use with rechargeable NiCd and NiMH batteries (AA / AAA) were determined. Never use the charger with other battery / battery types such as Lithium, Alkaline or other types. 2. The charger should be used only in dry, closed rooms only during normal operating conditions.
- Page 3 Function buttons: Display button (DISPLAY) Mode button Current button (CURRENT) (MODE) MODE button (mode): After inserting the batteries, the MODE button is used to select the desired charging mode ("CHARGE", "Discharge", "REFRESH" or "TEST"). To selecting you need to hold the MODE button for about 3 seconds. By repeatedly pressing will shown on the display the current mode.
- Page 4 CHARGE "CHARGE": The battery charger using as an automatic default setting a charging current of 200 mA. However, you can select in the first 5 seconds by the CURRENT button between 200, 500, 700, 1000 mA battery for 1-4 or up to 1800 mA for 1-2 batteries. (charging channels 1 and 4).
- Page 5 Note: • Always follow the battery manufacturer's directions and pay attention to the recommended maximum charging current. Basically a charge current of 200 mA is recommended, this is a safe and optimal value for each battery, when rapid charging is not necessary. •...
- Page 6 Entlade- und Ladestrom Tabelle / Charging and Discharging chart Strom im Entlademodus / DISCHARGE MODE Current Gewählter Entladestrom 100 mA 250 mA 350 mA 500 mA User-selected discharging current Anschließender Ladestrom 200 mA 500 mA 700 mA 1000 mA Thereafter charging current Entlade Modus Discharge mode Entladestrom: 350 mA...
- Page 7 Note: It can take several days to complete this process. It always depends to the selected discharge current. The maximum discharge current is 500mA. TEST MODE "TEST" With this mode, you can check, analyze the present capacity of your batteries. The battery charger will fully charge the batteries at first, then the batteries are fully discharged and charged again finally.
- Page 8 The proper disposal of your old product will help the environment and health. Rechargeable batteries must not to be disposed in domestic waste. Return used batteries to your dealer or to an authorised battery collecting point. www.accupower.at www.accupower.jp www.accupower.de www.accupower.hu www.b2b.accupower.at...