AccuPower APLC4S2A Instruction Manual

Li-ion charger, rapid charger unit for lithium-ion and lithium-polymer rechaargeable battery packs with 4 cells 14.4v or 14.8v

Download this manual

Rapid charger unit for Lithium-ion and Lithium-polymer rechargeable battery

Input:

100 – 240V AC 50-60Hz max 0.4A

Worldwide use thanks to wide-range input

Output:

16.8V DC max 2A (40W)

LED indicator:

Green: Standby / charge completed

Red:

READ THESE INSTRUCTIONS BEFORE USING THE CHARGER

This product is designed for indoor use only and should not come into contact with water, dust,

heat or direct sunlight. To prevent overheating the product should not be covered whilst in use.

Keep the device away from vibrations and do not drop the device.

Keep all flammable materials away from the charger.

Do not use the device in an explosive environment.

E-mail: info@accupower.at

Instruction Manual: Li-Ion C

INSTRUCTION MANUAL

APLC4S2A

packs with 4 cells (14.4V or 14.8V)

Battery is charging

1/2

harger

Web: www.accupower.at

APLC4S2A

Page 1: Instruction Manual
Instruction Manual: Li-Ion C APLC4S2A INSTRUCTION MANUAL APLC4S2A Rapid charger unit for Lithium-ion and Lithium-polymer rechargeable battery packs with 4 cells (14.4V or 14.8V) TECHNICAL SPECIFICATION Input: 100 – 240V AC 50-60Hz max 0.4A Worldwide use thanks to wide-range input Output: 16.8V DC max 2A (40W)
Page 2: Charging Instructions
Instruction Manual: Li-Ion C APLC4S2A This charger is designed for use with Lithium-ion and Lithium-polymer batteries. For safety reasons, this charger must be used only for Lithium-ion and Lithium-polymer batteries which have 4 cells in series: Output voltage 14.4 V or 14.8 V.