Grizzly T33905 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T33905 Scroll Saw Stand is specifical-
ly designed for the G0969 Scroll Saw. The stand
is made of steel, and the height can be adjusted
from 31"–38".
Figure 1. Model T33905.
To reduce risk of serious
injury, read these entire
instructions, as well as the
G0969 Scroll Saw manual,
BEFORE using scroll saw
stand.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © OCTOBER, 2023 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 07/23) #JM22794 PRINTED IN TAIWAN
***Keep for Future Reference***
MODEL T33905
SCROLL SAW STAND
for MODEL G0969
INSTRUCTIONS
Inventory
Description (Figure 2)
A. Top Braces (Long) ...................................... 2
B. Top Braces (Short) ..................................... 2
C. Legs............................................................ 4
D. Bottom Braces (Short)................................ 2
E. Adjustable Leg Extensions......................... 4
Bottom Braces (Long) ................................ 2
F.
G. Hex Bolts ⁄ "-18 x 1" ................................. 4
5
16
H. Carriage Bolts ⁄
5
16
Flat Washers ⁄
5
I.
16
Hex Nuts ⁄ "-18 ....................................... 28
5
J.
16
A
C
F
E
G
I
Figure 2. Inventory.
"-18 x ⁄ "....................... 24
1
2
"...................................... 32
B
D
H
J
V1.10.23
Qty