Advertisement
Attach (2) long top braces to legs with (4)
6.
18 x
⁄
" carriage bolts,
1
2
⁄
"-18 hex nuts, as shown in Figure 6.
5
16
Long Top
Brace
(1 of 2)
Figure 6. Long top braces attached to legs.
Attach (2) short top braces to legs with (4)
7.
⁄
"-18 x
⁄
" carriage bolts,
5
1
16
2
and
⁄
"-18 hex nuts, as shown in Figure 7.
5
16
x 4
Figure 7. Short top brace attached to stand legs.
Ensure stand is level, side to side and front
8.
to back, then tighten all fasteners installed in
Steps 3–7.
T33905 Scroll Saw Stand (Mfd. 07/23+)
⁄
"-
5
16
⁄
" flat washers, and
5
16
x 4
⁄
" flat washers,
5
16
Short Top
Brace
(1 of 2)
Mounting Model G0969 Scroll Saw
on Stand
Tools Needed
Safety Glasses (for each person).................1 Pr.
Wrenches 12mm................................................ 2
To mount G0969 Scroll Saw on stand:
Place stand on flat, level surface.
1.
With help from an assistant, position scroll
2.
saw on stand.
Secure scroll saw to stand using (4)
3.
x 1" hex bolts, (8)
⁄
"-18 hex nuts (see Figure 8).
5
16
Figure 8. G0969 Scroll Saw mounted on stand.
Qty
⁄
"-18
5
16
⁄
" flat washers, and (4)
5
16
x 4
-3-
Advertisement
