Lp/Propane Fixed Piping Connection - Viking VGRT242T Installation Instructions Manual

LP/PROPANE FIXED PIPING CONNECTION

Connection:
Operating Pressure:
Supply Pressure:
Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on
type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly.
To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 3/8" female flare adaptor to the
3/8" male flare adaptor to the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow
towards the unit and away from the supply. Attach the regulator assembly to the grill unit with the 3/8" flemale flare adapter
on the regulator assembly to the 3/8" male flare adaptor on the grill.
DO NOT forget to place the installer supplied gas valve in an accessible location.
Regulator Assembly
Standard Residential 1/2" ID gas service line - 1/2" NPT male with 3/8" flare adapter.
10.0" W.C.P. Nat.
11" to 14" W.C.P. Nat. If in excess of 14" W.C.P., a step-down regulator is required.
3/8" female
flare adaptor
Regulator
3/8" male
flare adaptor
3/8" Male
flare
adaptor
Installer supplied flexible
gas line with 3/8"
female flare adaptor or
Viking GHS12
4