Natural Fixed Piping Connection; Lp/Propane Fixed Piping Connection - Viking VGIB151TNSS Use & Installation Manual

Outdoor built-in trusear series infrared griller
Hide thumbs Also See for VGIB151TNSS:
Table of Contents

Advertisement

NATURAL FIXED PIPING CONNECTION

Connection:
Standard Residential 1/2" ID gas service line - 1/2" NPT male with 1/2" flare adapter.
Operating Pressure:
4.0" W.C.P. Nat.
Supply Pressure:
6" to 14" W.C.P. Nat. If in excess of 14" W.C.P., a step-down regulator is required.
Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on
type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly.
To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 1/2" (1.3 cm) female flare adapter to
the 1/2" (1.3 cm) male flare adapter on the regulator assembly. Ensure that the regulator arrow points in the direction of the
gas flow towards the unit and away from the supply. Attach the regulator assembly to the grill unit by pulling back the female
coupler sleeve towards the regulator. Insert the coupler into the male coupler fitting on the grill until the sleeve snaps forward
securing the connection. DO NOT forget to place the installer supplied gas valve in an accessible location.
NOTE: If using a Viking GSH12 flexible hose, remove the 3/8" flare adapter and attach hose to the 1/2" (1.3 cm) male flare on
the regulator assembly.
Female
coupler sleeve
Regulator
1/2" male
flare adapter
Regulator Assembly
Male
coupler
Installer supplied
fitting
shut-off valve must
be easily accessible
Installer supplied flexible
gas line with 1/2"
female flare adapter or
Viking GHS12
4

LP/PROPANE FIXED PIPING CONNECTION

Connection:
Standard Residential 1/2" ID gas service line - 1/2" NPT male with 3/8" flare adapter.
Operating Pressure:
10.0" W.C.P. LP/Propane
Supply Pressure:
11" to 14" W.C.P. LP/Propane If in excess of 14" W.C.P., a step-down regulator is required.
Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on
type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly.
To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 3/8" female flare adapter to the
3/8" male flare adapter to the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow
towards the unit and away from the supply. Attach the regulator assembly to the grill unit with the 3/8" female flare adapter on
the regulator assembly to the 3/8" male flare adapter on the grill.
DO NOT forget to place the installer supplied gas valve in an accessible location.
3/8" female
flare adapter
Regulator
3/8" male
flare adapter
Regulator Assembly
3/8" Male
Installer supplied
flare
shut-off valve must
adapter
be easily accessible
Installer supplied flexible gas line
with 3/8" female flare adapter or
Viking GHS12
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vgib242tnssVgib151tVgib242t

Table of Contents