Tape Speed - JVC HR-A591U Instructions Manual

Hide thumbs Also See for HR-A591U:
Table of Contents

Advertisement

Playback
Basic Playback
H
Load a cassette
Press PLAY (D>) on the
Remote.
• Playback will proceed at
1/10th of the normal speed.
• Press PLAY (D>) to resume
normal playback.
OR Press Play (11_)on the
VCR.
NOTE:
During slow motion picture, some noise might appear on
the TV screen. Use the SET-/+ on the Remote to eliminate
the noise.
Make sure the window side is up, the rear
label side is facing you and the arrow on
the front of the cassette is pointing
towards the VCR.
• Do not apply too much pressure when
inserting.
• The VCR turns on, and the counter on
the on-screen display is reset, automatically
• If the cassette's record safety tab has been removed, playback
begins automatically
H
Start playback
Press PLAY (E:>).
Press REW (<:3<3) or FF
(E:>¢>) on the Remote.
• Press PLAY (D>) to resume
normal playback.
Press REW (<3<3) or FF
(1_¢>) repeatedly on the
Remote.
• Press PLAY (D>) to resume
normal playback.
• Eachtime you press REW
(<3<3) or FF (_1_>) the
playback speed changes.
OR Press REW (_1_1) or
FF (I1_1_) on the VCR.
OR Press REW (_1_1) or FF
(I1_1_) repeatedly on
the VCR.
Press STOP (1_) on the
Remote.
OR PressSTOP/ElECT (11/
--_)on the VCR.
I "1
Press USE.
I "1
• Press PLAY (D>) to resume
normal playback.
Press PAUSE to pause, then
press
PAUSE repeatedly
Press PLAY (D>) to resume
normal playback.
TAPE SPEED
SP
EP
PICTURE SEARCH SPEED
PRESSONCE
PRESS TWICE
3X
5X
9X
15X
Press REW (<]<_) or FF
(l_q_)
on the Remote.
OR Press REW (_1_1) or FF
(I_1_)
on the VCR.
I "
Press STOP/El ECT (11/_) on
the VCR.
• You can also eject the
cassette when the VCR is
turned off.
Press POWER on the
Remote.
OR Press POWER if.b/I) on
the VCR.

Advertisement

Table of Contents
loading

Table of Contents