Table of Contents
Advertisement
Other Functions
•
Changing
display
information
Each time you press DISPLAY, the display
panel shows the time counter and the clock
time alternatively,
t
• When DISPLAY on the Remote is pressed,
time counter will appear on the TV screen.
To reset the time counter, press C. RESET on the Remote.
•
BLUE BACK - ON/OFF
When this function is set to "ON", the TV screen becomes all
blue in the following case:
When receiving a channel not in use.
H
Press MENU on the remote. Press SET -/+ to select
"NO NOISE BACKG ROUND".
[]
Press ENTER to select "ON".
Press MENU to return to normal screen.
•
STEREO RECORDING AND PLAYBACK
RECORDING STEREO BROADCASTS
The VHS Hi-Fi audio system permits high fidelity recording
of MTS STEREOTV broadcasts.
When a MTS STEREObroadcast
is
fSTEREO
received, the STEREOwill appear on
L
the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording proce-
dure is the same as for normal
recordings.
NOTE: When using a CATV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
the word "STEREO"will not appear and the sound will
be in mono.
OUTPUT SELECTION
When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREOvideotape, press A.MONITO R
to select how the audio will be heard through the speakers.
Normally set to the Hi-Fi STEREOposition, this button can be
set to the MONO position if the stereo broadcast or videotape
audio is of poor quality The "R" and "L" positions allow the
audio from the Right or Left Hi-Fi channel to be heard over
both TV speakers. This button has no effect when viewing a
MONO videotape or TV program. Each time when you press
the button, OUTPUT SELECTIONdisplay appears on the screen
for several seconds. Refer to the chart below.
OUTPUT
SOUND HEARD ON BOTH
SELECTION
SPEAKERS
STEREO
STEREO
L ch
LEFT CHANNEL AUDIO
R ch
RIGHT CHANNEL AUDIO
MONO
MONO
•
SEPARATE AUDIO
PROGRAM
(SAP)
Your VCR is fitted with an SAP broadcast system which
enables you to switch to a SEPARATE AUDIO PROGRAM
when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages
through the SAP broadcast
system.
When a TV is connected with an audio/video cable, turn the
TV and this VCR on, and select the video input mode the TV.
H
Press MENU.
Press on the Remote SET -/+
to select "SAP" option.
Press ENTER to select "ON"
position.
Press MENU to return to
normal screen.
f
MENU
| CLOCK SET
| TIMER REC SET
i AUTO REPEAT
ON _'OFF
i._H SET UP
i SAP
ON I_OFF
i*&.ANGUAGE/IDIOMA/LANGUE
i NO NOISE
BACKGROUND
ONII_OFF
(+/-/ENTER/MENU)
•
f
MENU
i CLOCK SET
i TIMER REC SET
l AUTO REPEAT
ON I_OFF
I,_H SET UP
l SAP
IbON
OFF
I'_,ANGUAGE/IDIOMA/LANGUE
l NO NOISE
BACKGROUND
ONIb.OFF
(+/-/ENTER/MENU)
•
•
LISTENING TO SAP
When the VCR is turned on or a channel selection is made,
make certain "SAP" appears on the screen.
This means that the "Separate Audio Program" broadcast-
ing is available.
ISTERE
10 I SA I
JVC TV Remote Control
This Remote can control some functions (TV POWER,
INPUT, TV CH -/+ and TV VOL -/+) of a remote
controllable JVC TV without setting.
NOTE:
• It's not possible to operate a unit not equipped with a
remote sensor.
• This Remote can control a JVC TV only.
NOTES: • When playing back a tape that is not recorded in
Hi-Fi stereo mode, the audio will automatically be
monaural.
• When listening to a VHS Hi-Fi video tape or MTS
broadcast through the VHF/UHF jack (Audio/
Video cord not connected), the sound will be
monaural.
Advertisement
Table of Contents
