Advertisement
EN
A -
Seat cover
B -
Adjustable headrest
Newborn inlay
C -
D -
Removable shoulder and lap pads
E -
5-point harness
F -
Harness buckle
G -
Harness adjuster button
H -
Rotation handle
I -
Indicator for car seat locked in rearward or
forward-facing position
J -
Harness adjuster strap
K -
Recline handle
L -
Slide out handle
M -
Rearward/Forward facing selector button
N -
Support leg
O -
Support leg adjuster button
P -
Support leg height adjustment rack
Q -
Support leg indicator
R -
G-CELL Side Protection System
S -
ClimaFlow Air ventilation
T -
ISOFIX connectors
U -
ISOFIX connectors release button
V -
Headrest adjustment handle
W -
Manual storage
SAFETY
• The Mica 360 Pro i-Size is intended for car use
only.
• The Mica 360 Pro i-Size is developed for an
intensive use of approximately 12 years.
• Do not use any load bearing contact points
other than those described in the instructions
and marked in the child restraint.
• Do not leave your child unattended in the car.
With an outside temperature of 20 degrees the
I
84
Mica 360 Pro i-Size 40 cm-105 cm / 18 kg
I
Maxi-Cosi
car interior heats up in 20 minutes to 40
degrees Celsius which causes a risk. To prevent
risk of overheating consider a Child reminder
device e.g. Maxi-Cosi e-Safety inlay cushion.
The Mica 360 Pro i-Size car seat in the car:
• The car seat can be rotated 360° and slide out
to help you get your child in and out of the
vehicle easily. This also allows you to change
the position of the seat from rearward facing to
forward facing.
• Before buying this product make sure the car
seat is compatible with the vehicle it is to be
used in.
• The car seat must be installed with ISOFIX and
support leg.
• The support leg must always be unfolded
completely, locked, and placed in the most
forward position.
• When the child restraint is installed in the
maximum rearward facing position, it may not
fit in all approved vehicles. Please check that
all possible positions of the car seat (recline
positions and headrest adjustment) fit in
your car.
ATTENTION:
• In ISOFIX use, the fitting clips for lower
anchorage to the vehicle are not sufficient. It is
essential to fix the "Support Leg".
• The ISOFIX anchors have been developed to
obtain a safe and easy fixation of the child
safety systems inside the car. Not all cars are
Advertisement
