Safety Instructions - ULTIMATE SPEED USWB 22 A2 Operation And Safety Notes

22 kw ev charger
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Residual current detection:
Appliance class:
Output plug:
PLEASE NOTE: Changes to technical and visual aspects of the product may be made as part of
future developments without notice. Accordingly, no warranty is offered for the physical dimensions,
information and specifications in these operating instructions. The operating instructions cannot therefore
be used as the basis for asserting a legal claim.
z Safety instructions
PLEASE READ THROUGH THE OPERATING INSTRUC-
TIONS CAREFULLY BEFORE USE. THESE FORM PART OF
THE PRODUCT AND MUST BE AVAILABLE AT ALL TIMES!
This section covers the basic safety instructions applicable when
working with the device.
Personal safety:
Keep children and animals away from the EV charger
Children must be supervised to ensure that they do not play with
the device.
Within the working area, the user is responsible for any damage
or injury to third parties that was caused by the use of the device.
Keep the device out of the reach of children.
People with cardiac pacemakers or defibrillators must contact the
manufacturers of the devices before using the charging systems
or working on or spending time near the equipment, for example,
for maintenance purposes or rectifying faults.
This helps prevent device damage and possible personal injuries
that could result from it:
Working with the device:
Before setup or first use, check the device for any damage and do
not use unless in perfect working order.
Do not submerge the device in water. There is a risk of electric
shock!
Do not expose the device to high outdoor temperatures. This could
permanently damage the device.
Do not operate the device near to flammable liquids or gases.
Do not use the device to draw in hot fumes. Failure to do so risks
causing a fire or explosion!
Switch the device off and disconnect from the mains voltage:
if you are doing cleaning work;
6 mA DC
I
T2 (in accordance with EN 62196-2)
GB/IE/NI/CY/MT
.
1
9

Advertisement

Table of Contents
loading

Table of Contents