Table of Contents
Advertisement
4-4.
Switching Regulator
Tip
Two switching regulators are installed in the main unit. This section describes the procedure for one of them. The same
replacement procedure can be used for two switching regulators.
Preparation
1.
Refer to
"4-2. Flow
Chart".
Procedure
1.
Press the lever in the direction of the arrow A and pull out the switching regulator.
Switching regulator
Lever
(A)
2.
Install the switching regulator.
Note
Install the switching regulator surely until it is locked.
PWS-4500
Switching regulator
CN1 (HN-431 board)
4-7
Advertisement
Table of Contents
