Introduction; General; Safety Information; Third Party Building Management System - Daikin Maverick I Installation And Maintenance Manual

Introduction

General

Read this manual and any instructions packaged with separate
equipment prior to installation. Give this manual to the owner
and explain its provisions. The owner should retain this
manual for future reference.
Unit
Rooftop unit control configuration
BACnet Communication Module
LonWorks Communication Module
Field Installed Accessories
Maverick I, 3 to 5 ton Installation and Maintenance
Maverick I, 6 to 12 ton Installation and Maintenance
Maverick I, 15 to 25 ton Installation and Maintenance

Safety Information

These instructions are intended as an aid to qualified service
personnel for proper installation, adjustment, and operation of
this unit. Read these instructions thoroughly before
attempting installation, adjustment, or operation. Failure to
follow these instructions can result in improper installation,
adjustment, service or maintenance, possibly resulting in fire,
electrical shock, property damage, personal injury, or death.
Before beginning any modification, be sure main disconnect
switch is in the "off" position. Failure to do so can cause
electrical shock resulting in property damage, personal injury
or death. Tag disconnect with a suitable warning label.
Static sensitive components. Discharge any static electrical
charge by touching the bare metal inside the control panel
before performing any service work. Never unplug cables,
circuit board terminal blocks, or power plugs while power is
applied to the panel.
McQuay OM 1077
Manual
OM 1077
IM 1000
IM 999
IM 921
IM 970
IM 971
IM 972
DANGER
DANGER
CAUTION
NOTICE
This equipment generates, uses, and can radiate radio
frequency energy and; if not installed and used in accordance
with this instruction manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at their own expense.
The Maverick I 3 to 25 ton Package has a Rooftop Unit
Controller factory mounted and wired in their respective
control panel. The DDC Controller is a solid-state
microprocessor-based control board that provides flexible
control and extensive diagnostics for all unit functions. The
DDC Controller through proportional/integral control
algorithms perform specific unit functions that govern unit
operation in response to; zone conditions, system
temperatures, ambient conditions and electrical inputs. The
DDC Controller features an LCD display and a five-button
keypad for local configuration and direct diagnosis of the
system.
The Maverick I 3 to 25 ton Package Air Conditioner with
integral Rooftop Unit Controller (DDC Controller) is
specifically designed to be applied in three distinct
applications:

Third party Building Management System

In an application where a third party building management is
in use or will be incorporated the Maverick I is communication
compatible with the system that supports the BACnet
Application Specific Controller device profile, LonMark
Space Comfort Controller functional profile. This is
accomplished with a field installed BACnet or LonMark
communication module. The BAS system provides the
schedule functions for the DDC controller.
BACnet Communication Module
The BACnet Communication Module allows communication
between the DDC Controller and the BACnet network. The
communication module translates input and output variables
between the DDC Controller protocol and the BACnet
protocol.
The BACnet Communication Module is compatible with
MSTP EIA-485 daisy chain networks communicating at 38.4
bps. It is compatible with twisted pair, shielded cables.
See IM 1000 for full documentation
LonMark Communication Module
The LonMark Communication Module allows communication
between the DDC Controller and a Lon Works Network. The
Introduction
3