Panasonic Omnivison VCRplus+ PV-V4611 Operating Instructions Manual page 13

VCR's Output Channel
'Important: If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.
■Time Zone Adjust ■ VCR's Output
Channel
(Only when Auto Clock is set.
1) Press ◄ ► to select
CLOCK.
I" VCR ~ !*•& OCK| CHANNEL!'
fAUTCTCtOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT :* ▼ 4 ►
EXIT : ACT I ON
2) Press AT to select
TIME ZONE ADJUST
T~vcr rclock! channelH
[AllTO'CLOCK set
I MANUAL_
TIME ZONE ADJUST : 0
SELECT:* ▼
SET;**-
I EXIT : ACTION I
i-1_,
and press 4 or ► to
subtract or add hour(s)
as necessary.
3) Press ACTION.
4) Press POWER off to
perform AUTO
CLOCK SET.
• TIME ZONE ADJUST
returns to "0" if clock is
set manually.
1) Press
AT
to select
VCR'S OUTPUT CH.
rVCR~l_CLOCK I CHANNEL
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT-OFF :ON
mmmmk
SELECT:* ▼
SET:*
EXIT : ACT ION
2) Press ►.
VCR'I CLOCK | CHANNEL |
IF YOU PRESS ACTION
KEY, VCR'S OUTPUT CH
SWITCHES TO CH 4.
3) Press ACTION.
After 3 seconds
vCrH_CLOCK I .chawed
REPEAT PLAY :OFF
REMOTE WARNING ON
AUTO SHUT-OFF :ON
IPIOMAILANGUE : ENGLISH
SELECT:* ▼
SET:*
[1_EXIT : ACT I ON
• To Make Corrections,
repeat step 1) - 3).
POWER
VCR
SELECT/
SET
A
PLAY
▼ :STOP
◄ PEW
► :FF
NUMBER
keys
ACTION
ADD/
DELETE
CH
A/V
DST (Daylight Saving Time)
VCR auto adjusts clock for DST.
(Page 9.)
Spring (First Sunday in April)
DST:ON --> Sets clock ahead one hour.
Autumn (Last Sunday In October)
DST:ON --> Turns clock back one
hour.
• If your area does not observe
Daylight Saving Time, select
DST:OFF.
• Keep these time changes in mind
when programming the VCR for
timer recordings.
13