Table of Contents
Advertisement
Tape Operation
Special VCR Features
Repeat Play
Set to playback a recording over and over.
1
Press ACTION*
to display menu.
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be detected for VHS-C
Cassette types and tapes of less than 60
minutes length.
Press AT
to select REPEAT
PLAY and press ► to
set ON or OFF.
• Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
3
Press ACTION
to return to normal screen.
Zero Search
To quickly return to a specified tape location.
1
Press DISPLAY during play
to display Counter.
Press COUNTER
RESET at desired
position
to reset to "0:00:00".
^ Continue to record, playback, etc.
^ Press Stop.
Press CM/ZERO
in Stop mode
to start ZERO
SEARCH.
• Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00-
1
Press TAPE POSITION
to detect Tape Position.
•"DETECTING TAPE
POSITION" only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
• The present tape
position indication is
displayed.
O Press TAPE POSITION
™ to return to normal screen.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 20), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV, DSS, or Cable
mode.
Press AT
to select REMOTE
WARNING and press ►
to set ON or OFF.
• If "OFF," remote
warning will not
appear if invalid
key is pressed.
Press ACTION
to display menu.
AUTO SHUT-OFF
ON
IDIOMAILANGUE : ENGLISH
VCH'S OUTPUT CH
:3
3
Press ACTION
to return to normal screen.
• If a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
position may not be accurate.
Advertisement
Table of Contents
