IMPORTANT: This document is to be used in conjunction with the RC-2A Technical
Practice (Fax Back Document 160).
A. Legacy Programming (JP1 in place)
The RC-2A contains (3) rotary access code switches. Using a small flat blade screwdriver, rotate
the white arrow on each switch to the desired access code setting.
B. Alternative Programming (JP1 removed)
The RC-2A contains (3) rotary access code switches (see diagram below). Using a small flat blade screwdriver, rotate
the white arrow on each switch to the desired access code setting.
P
r
o
d
u
c
t
S
u
p
p
o
r
t
P
r
o
d
u
c
t
S
u
p
p
o
r
t
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate