Viking RC-2A Product Manual
  1. Manuals
  2. Brands
  3. Viking Manuals
  4. Controller
  5. RC-2A
  6. Product manual

Viking RC-2A Product Manual

Remote touch tone controller
Hide thumbs Also See for RC-2A:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Control Relay Contacts Remotely
The RC-2A Remote Controller provides remote
relay operation from any standard Touch Tone
telephone.
The controller is designed to be installed either lo-
cally or remotely. For local installations the RC-2A
can be installed in parallel on any analog commu-
nications path, such as analog C.O. lines or analog
PABX/KSU stations and will passively monitor for
Touch Tone commands.
For off-premise applications, the RC-2A will an-
swer analog C.O. lines or PABX/KSU stations after
a selectable ring delay. A field programmable ac-
cess code can be programmed to prevent unau-
thorized usage, and then the RC-2A can be
activated to allow remote relay operation.
Features
• Programmable access code
• Normally open or normally closed relay
• Selectable relay closure times
• Selectable ring delay (1, 2, 6, or 15)
• Universal 12-24V AC/DC power input
• Easy installation with screw terminals
and dip switch programming
• Automatic disconnect or return to secure
mode after 60 seconds
• Power multiple units from one adapter
• One year warranty
www.vikingelectronics.com
Information: (715) 386-8861
PRODUCT MANUAL
Note:
C-1000B
Applications
Remote Control of:
• High security building entry
• Heating/cooling equipment
• Pumps and fans
• Security systems
• Gates
• Lighting
• PABX/KSU reset
Specifications
Power: 120VAC / 12VDC 500mA UL listed
adapter provided, alternative power input:
12-24V AC/DC 200mA minimum
Dimensions:
133mm x 89mm x 44mm
(5.25" x 3.5" x 1.75")
Shipping Weight: .9 kg (2 lbs)
Environmental: -40°C to 70°C (-40°F to
160°F) with 5% to 95% non-condensing hu-
midity
Relay Contact Ratings:
250VAC
Connections: (1) 8 position screw terminal
block
RC-2A
Remote Touch Tone
Controller
April 16, 2013
W-Series
SRC-1
5A @ 30VDC/

Advertisement

Table of Contents
loading

Related Manuals for Viking RC-2A

Summary of Contents for Viking RC-2A

  • Page 1 Touch Tone telephone. The controller is designed to be installed either lo- cally or remotely. For local installations the RC-2A can be installed in parallel on any analog commu- nications path, such as analog C.O. lines or analog PABX/KSU stations and will passively monitor for Touch Tone commands.

  • Page 2: Installation

    The RC-2A has two operational modes built in, called the Legacy and Alternative modes. The Legacy mode is the standard mode of operation that has existed in all previous versions of the RC-2A. The Alternative mode is a second mode of operation that increases the RC-2A's flexibility in some applications. The operational mode you should use depends on the exact application for the RC-2A.

  • Page 3: Legacy Mode

    As the other phones are making outgoing phone calls, if they dial a phone number that includes the digit "9", the RC-2A will operate it's relay. In these ap- plications, you must either use the Legacy mode and set a security access code (no rotary entry code switches set to D), or use the Alternative mode and set at least one digit of the relay activation command to be either a "Q"...
  • Page 4 This DIP switch is only used in the “Alternative Programming Mode” and has no function in the “Legacy Mode”. Switch 5: Selecting Modes If this DIP switch is in the OFF position, the RC-2A is in the “Legacy Programming Mode”. In the ON position, the RC-2A is in the “Alternative Programming Mode”.
  • Page 5 Alternative Programming Mode Important: ONLY RC-2A A. Security In the “Alternative Programming Mode” (DIP switch 5 ON), access to the RC-2A is im- Rotary Touch mediate and it becomes possible to program a one, two or three digit relay activation Switch Tone code.

  • Page 6: Dip Switch Settings

    A. Legacy Mode If the RC-2A is programmed to answer a ringing line (DIP switch 7 ON), it will answer after the selected ring delay. A single acknowledgement tone will be heard, signaling the user that the RC-2A has answered the line. If a se- curity access code has been programmed (no code switches set to D), a touch-tone "Q"...

  • Page 7: Related Products

    B. Alternative Mode If the RC-2A is programmed to answer a ringing line (DIP switch 7 ON), it will do so after the selected ring delay. A single or double acknowledgement tone will be heard, signaling the user that the RC-2A has answered the line.

  • Page 8: Warranty

    Product Support: (715) 386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

Table of Contents