Table of Contents
Advertisement
W H A T T O D O I N E M E R G E N C I E S
Tire Service Kit Components And Operation
Using The Mode Select Knob And
Hoses
Your Tire Service Kit is equipped with the follow-
ing symbols to indicate the air or sealant mode.
Selecting Air Mode
Selecting Sealant Mode
Using The Power Button
Using The Deflation Button
90
Push in the Mode Select
Knob (5) and turn to this
position for air pump op-
eration only. Use the
Black Air Pump Hose (7)
when
selecting
mode.
Push in the Mode Select
Knob (5) and turn to this
position to inject the Tire
Service Kit Sealant and to
inflate the tire. Use the Seal-
ant Hose (clear hose) (6)
when selecting this mode.
Push and release the
Power Button (4) once to
turn On the Tire Service
Kit. Push and release the
Power Button (4) again to turn Off the Tire Service Kit.
Push the Deflation Button (2) to reduce the air pressure in the tire if it
becomes over-inflated.
this
Tire Service Kit Components
1 — Sealant Bottle 5 — Mode Select Knob
2 — Deflation
Button
3 — Pressure
Gauge
4 — Power Button 8 — Power Plug (located
6 — Sealant Hose (Clear)
7 — Air Pump Hose
(Black)
on the bottom side of the
Tire Service Kit)
Advertisement
Table of Contents
