Installation instructions
Induction hob
CookTop Teppan Yaki I40
The appliance must be installed by qualified personnel only. Each step must be carried out and checked in full in the
order specified.
Validity
These installation instructions apply to the following models:
Model designation
CookTop Teppan Yaki I40
General notes
If installing into a combustible material, the guidelines and standards for low voltage installations and fire protection
must be strictly observed.
Identification plate
The identification plate is located on the underside of the
appliance.
▸
Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.
Care and maintenance
▸
Follow the care and cleaning advice in the operating instructions.
▸
Follow the basic maintenance advice in the operating instructions.
Features
Designation
Cementing-in instructions
Sealing strip set
Spacer set
Installation accessories
Surface-mounted installation:
Designation
Stainless steel intermediate support for the surface-mounted combination of several hobs
Black intermediate support for the surface-mounted combination of several hobs
Side strip set for surface-mounted combination with intermediate support
Flush installation:
Designation
Steel angle set, installation dimension 40
Ventilation protective plate set for niche width 550 mm
Ventilation protective plate set for niche width 600 mm
Intermediate support kit for the flush-mounted combination of several hobs (contains two intermediate supports)
Instant adhesive for installation of the steel angle (50 ml)
Straight mixing nozzle
TREMCLEAN isopropyl alcohol (1000 ml)
Black silicone FA880 (310 ml)
1097806-04
Type
CTI6T-31140
Identification plate
1
With DualDesign
CTI6T4Y1MSD
Connection plate
1097806-04
27/07/2023
Art. no.
J004133
H62695
H60330
Art. no.
1014361
1019199
1028587
Art. no.
H63771
H61082
H61083
H63789
B11657
B11656
1056609
B11555