Advertisement
Quick Links
Installation instructions
Induction hob
CookTop Teppan Yaki I40
The appliance must be installed by qualified personnel only. Each step must be carried out and checked in full in the
order specified.
Validity
These installation instructions apply to the following models:
Model designation
CookTop Teppan Yaki I40
General notes
If installing into a combustible material, the guidelines and standards for low voltage installations and fire protection
must be strictly observed.
Identification plate
The identification plate is located on the underside of the
appliance.
▸
Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.
Care and maintenance
▸
Follow the care and cleaning advice in the operating instructions.
▸
Follow the basic maintenance advice in the operating instructions.
Features
Designation
Cementing-in instructions
Sealing strip set
Spacer set
Installation accessories
Surface-mounted installation:
Designation
Stainless steel intermediate support for the surface-mounted combination of several hobs
Black intermediate support for the surface-mounted combination of several hobs
Side strip set for surface-mounted combination with intermediate support
Flush installation:
Designation
Steel angle set, installation dimension 40
Ventilation protective plate set for niche width 550 mm
Ventilation protective plate set for niche width 600 mm
Intermediate support kit for the flush-mounted combination of several hobs (contains two intermediate supports)
Instant adhesive for installation of the steel angle (50 ml)
Straight mixing nozzle
TREMCLEAN isopropyl alcohol (1000 ml)
Black silicone FA880 (310 ml)
1097806-04
Type
CTI6T-31140
Identification plate
1
With DualDesign
CTI6T4Y1MSD
Connection plate
1097806-04
27/07/2023
Art. no.
J004133
H62695
H60330
Art. no.
1014361
1019199
1028587
Art. no.
H63771
H61082
H61083
H63789
B11657
B11656
1056609
B11555
Advertisement
Related Manuals for V-ZUG CookTop Teppan Yaki I40
Summary of Contents for V-ZUG CookTop Teppan Yaki I40
- Page 1 1097806-04 Installation instructions 27/07/2023 Induction hob CookTop Teppan Yaki I40 1097806-04 The appliance must be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified. Validity These installation instructions apply to the following models:...
- Page 2 A pole conductor has been connected to the connection terminal for neutral conductors. Quickly disconnect the appliance from the mains! Ventilation For installation of a V-ZUG induction hob, the following minimum requirements apply: The hot air exhaust should be provided by a ventilation slit of ≥2 mm at the front.
- Page 3 1097806-04 Installation instructions 27/07/2023 Induction hob CookTop Teppan Yaki I40 1097806-04 Recommendation If the hob is being used at the power limit, a reduction in power after a certain amount of time is normal. All induction hobs available on the market can be observed to work in the same way.
- Page 4 1097806-04 Installation instructions 27/07/2023 Induction hob CookTop Teppan Yaki I40 1097806-04 Combination installation For surface-mounted combination installation, the side strip set 1028587 and the intermediate support 1014361 (stainless steel) or 1019199 (black) are needed. ▸ The side strips must be fixed on the left-hand and right-hand side of the appliance with four screws on each side.
- Page 5 1097806-04 Installation instructions 27/07/2023 Induction hob CookTop Teppan Yaki I40 1097806-04 ▸ Prepare the cut-out and appliance according to the specifications in the enclosed cementing-in instructions and align the appliance in the cut-out. ▸ Carefully cement the appliance in and leave the silicone sealant to dry for at least 24 hours.
-
Page 6: Cancelling User Settings
1097806-04 Installation instructions 27/07/2023 Induction hob CookTop Teppan Yaki I40 1097806-04 Changes to the service menu Changes to the service menu can only be made within 1 minute of applying the voltage. If the appliance has already been connected for a longer period, interrupt the power supply for about 10 seconds.