Page 1
If installing into a combustible material, the guidelines and standards for low voltage installations and fire protection must be strictly observed. Validity These installation instructions apply to the following models: Product family Type Appliance class 31063 GAS411GSBZ Class 3 DIN EN 30-1-1 31064 GAS421GSBZ 31071 GAS641GSBZ 31072...
Page 2
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 Installation accessories provided For all installation variants: Designation Art. no. 4 adjusting braces H61561 Sealing ring gas connection 18 × 13 × 1.5 mm H64006 Flush installation: Designation Art.
Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 Surface-mounted installation The cooking zone layout of the hob to be fitted may differ from the hob illustrated! GAS411GSBZ, GAS421GSBZ GAS641GSBZ GAS951GSBZ Y – Y T ≥90 Drawer/ cabinet...
Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 Flush installation The cooking zone layout of the hob to be fitted may differ from the hob illustrated! GAS411GSBZ, GAS421GSBZ GAS641GSBZ GAS951GSBZ Detail Z Y – Y R0–5 T ≥90...
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 ▸ Connect to the electrical mains connection before inserting the appliance, if necessary. Combination installation Flush combination installation is described in document 1014381. The intermediate support kit H63789 is required for this. Electrical connection Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards for low-voltage installations and the specifications of the local electricity supply companies.
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 Minimum distances and installation conditions The distance from the appliance cut-out to the back wall must be ≥50 mm and to the side walls ≥200 mm. Parts such as side walls and reinforcing strips which protrude into the installation space under the cooking zone must be made of fire-resistant material.
Page 7
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 ▸ The gas connection must be positioned so that the stop-cock and the supply connection point are accessible with the appliance in- stalled. ▸ The gas connection must be positioned so that it does not get detrimentally hot during operation. In particular, the gas hose assem- blies and the appliance’s connection fittings must be clear of hot exhaust gases (e.g.
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 Changes to the service menu Changes to the service menu can only be made within 1 minute of applying the voltage. If the appliance has already been connected for a longer period, interrupt the power supply for about 10 seconds.
1014422-R09 Installation instructions 27/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1014422-R09 GAS641 ... GAS951 ... Type Slider 1 Slider 2 Slider 3 Slider 4 Slider 5 GAS641 … Gas configuration GAS951 … Gas configuration Conversion to another gas type The appliance is set up for a certain gas type, which is also recorded on the identification plate.