Troubleshooting; Optional Accessories - Makita LM003G Instruction Manual

Removing the mower blade
1. Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2. To lock the blade rotation, insert a pin or tool such
as screwdriver into a hole on the mower body.
3.
Turn the bolt counterclockwise with the wrench.
► Fig.32: 1. Mower blade 2. Wrench 3. Screwdriver
4. Hole
4. Remove the bolt and blade in order.
► Fig.33: 1. Blade support 2. Mower blade 3. Bolt

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to disassemble the machine. Instead, ask Makita Authorized Service Centers, always using Makita
replacement parts for repairs.
State of abnormality
Mower does not start.
Motor stops running after a little use.
Motor does not reach maximum
RPM.
Mower blade does not rotate:
stop the mower immediately!
Abnormal vibration:
stop the mower immediately!

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments
are recommended for use with your Makita
machine specified in this manual. The use of any
other accessories or attachments might present a risk
of injury to persons. Only use accessory or attach-
ment for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Mower blade
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
product package as standard accessories. They may
differ from country to country.
Probable cause (malfunction)
Battery cartridge is not installed.
Battery problem (under voltage)
Battery's charge level is low.
Cutting height is too low.
Battery cartridge is installed improperly.
Battery power is dropping.
The drive system does not work correctly. Ask your local authorized service center for repair.
Foreign object such as a branch is
jammed near the blade.
The drive system does not work correctly. Ask your local authorized service center for repair.
Blade is imbalanced, excessively or
unevenly worn.
17 ENGLISH
Installing the mower blade
To install the mower blade, take the removal procedure in reverse.
WARNING:
Install the mower blade carefully.
It has a top/bottom facing.
WARNING:
Tighten the bolt clockwise firmly
to secure the blade.
WARNING:
Make sure that the mower blade and all
the fixing parts are installed correctly and tightened securely.
WARNING:
When you replace the blades, always
follow the instructions provided in this manual.
NOTICE:
When tightening the bolt to install the
mower blade, apply 19 - 29 N•m as tightening
torque (the values are just for a reference).
Remedy
Install charged battery cartridge.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Increase the cutting height.
Install the battery cartridge as described in this manual.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Remove the foreign object.
Replace the blade.