Advertisement
INTRODUCTION
This manual contains all information required for the intended use of the equipment.
Deviation from the described intended use can result in a hazardous situation and/or
property damage.
DESCRIPTION
Product code
Voltage
Power consumption
Power connector
The COMBINER 19" RACK is a spltter and booster device for the safety signal of the
ARM SYSTEM. The COMBINER 19" RACK acts as a slave of the connected ARM
CONTROLLER, which is the master of the safety line.
The COMBINER 19'' RACK is equipped with four (2x2) outputs that each can be
combined with a DMX signal to make a ARM+DMX output. The 19'' 1U rack size makes
it easy to combine with a DMX splitter.
For more information about the ARM SYSTEM and to learn how to configure a
complete safety system, refer to the ARM SYSTEM Configuration Manual (PART02323).
For more information about the ARM CONTROLLER and to learn how to correctly set
up and use the ARM SYSTEM, refer to the ARM CONTROLLER User and Installation
Manual (PART01882).
FRONT
BACK
GROUP A/B
ARM IN
MAGICFX
SFX SAFETY COMBINER 19" RACK — User and Installation Manual
®
MFX3224
100 – 250 Vac
50 / 60 Hz
120 W
Neutrik® powerCON TRUE1
(in)
GROUP A
M6 SAFETY
EYE
MASTER LINE
ARM OUT
ARM SIGNAL LED (red)
DMX SIGNAL LED (green)
ARM / DMX+ARM
connector
Size (LxWxH)
Weight
Mounting options
GROUP B
POWER
CONNECTORS
SLAVE LINE 1
DMX IN
DMX+ARM OUT
ARM SIGNAL LED (red)
DMX SIGNAL LED (green)
© 2022 MAGICFX
All rights reserved.
Neutrik® etherCON,
RJ45 (in&out)
24 cm x 19" x 1U
4.15 kg
19" 1U rack
Technical data
SLAVE LINE 2
DMX IN
DMX+ARM OUT
®
Main parts
Advertisement
