Viking C-1000B Technical Practice page 2

e.g
I n s t a l l a t i o
I n s t a l l a t i o
A. Mounting
The K-1200 is designed to be installed in a sheltered location, and is not meant to be used outdoors. For outdoor appli-
cations use the K-1200-EWP. The K-1200 can either be installed as a flush mount unit using the included rough in box,
or as a surface mount unit using an optional VE-5x10. The rough in box uses the inner set of four holes on the face
plate while the VE-5x10 uses the outside set of holes. A set of dummy screws and nuts are provided to fill the unused
mounting holes.
5.00"
4.50"
0.952" 2.596"
10.0"
1
2
9.5"
3
4
5
6
7
8
9
0
*
#
VIKING
©
Front View
of the K-1200
2
n
n
Side View
of the K-1200
0.425"
(8) #6-32 x 3/4"
Stainless Steel
Hexdrive Screws
8.65" (included)
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet
!
and the telephone line. It is recommended that a surge protector be installed to protect against such surges. Contact
Panamax at (800) 472-5555 or Electronic Specialists Inc. at (800) 225-4876.
Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666
Zinc-Plated Steel
Rough-In Box (included)
2.5"
4.5"
- or -
9.12"
Optional VE-5x10 Surface
Mount Box (not included)
3.69"
5.22"
10.14"