Advertisement
X-E5
PS-93UA or PS-94UA
Model : PS-93UA or PS-94UA
Power supply for the audio model UD series.
Audio signal lines in 15P and 19P flat cable are con-
nected to RCA connectors.
Explanation of the function
@ POWER SWITCH
This switch should be turned on when using the 15
pin PRE CD DECK @, the 19 pin PRE CD DECK ©
and 4 pin power supply ©.
@ 15 PIN POWER AMP
Connect to a system which require the 15 pin flat
cable for connection, when check the power amp.
section.
AC power source is not output from the terminal.
The signals are input and output to the RCA termi-
nals and SYNC terminal on the front panel.
(ex : A-711, A-722, A-A7, B-992, B-AY, etc)
® 15 PIN PRE CD DECK
Connect to a system which require the 15 pin flat
cable for connection, when check the functions ex-
cept power section AMP.
The AC power are supplied to the pin No.12, 13 for
QV and the pin No.14, 15 for 16V from the terminal.
The signal flow are same as 15 pin power AMP ter-
minal.
(ex : DP-711, DP-722, DP-A7, C-922, X-711, X-722,
X-A7, etc)
® 19PIN POWER AMP
Connect to a system which require the 19 pin flat
cable for connection, when check the power AMP
section.
The AC power is not supplied in the terminal.
The signals are input and output to the RCA terminal
on the front of panel.
(ex : A-B7, A-B3, B-B9, A-E5, A-E7, B-E9, etc)
KENWOOD MODEL PS-93UA or PS-S4UA
® 19 PIN PRE CD DECK
Connect to a system which require the 19 pin flat
cable for connection, when check the component
except power AMP. This terminal have the 4 sys-
tem AC power supplies which is located to the pin
No.13 to pin No.19.
(ex : X-B9, X-B5, X-B3, C-B9, DP-B5, DP-MB5, X-E5,
X-ME5, X-E7, X-ME7, DP-E9, X-E9, C-E9, etc)
SYNC TERMINAL
Connect to the SYNCHRO CHECK JIG KSJ-0816. It
can be controlled the system code 8 bit or 16 bit to
the test set.
4 PIN POWER SUPPLY
Output terminal for AC 9V and ACI16V.
It can be used supply the AC power to DECK, CD,
TUNER for MIDI system.
TAPE SWITCH
The signal for deck of 19 pin terminal are share a
well with the REC and PLAY.
So, please change the TAPE SW when DECK mode
is PLAY or STOP then turn to the play, when DECK
mode is REC or REC pause then turn to the REC.
(ex : X-B9, X-B5, X-B3, X-E9)
Note
For limited power supply's capacity, maximum con-
nection is only one sets.
Do not connect a set together both with the 15 pin
terminal and 19 pin terminal.
In/output signals will shift as specified in the caution
label when A-E5, A-E7, X-E5, X-ME5, X-E7, and X-
ME7,
PLAY + TAPE REC
CD
-— TAPE PLAY
LINE
+
CD
>,
Go.
GO
Cc
|
|
Co
CO
©
Cc
OUT
REC
TAPE
Le
PLAY
TAPE
REC
15P POWER AMP
15P PRE CD DECK
19P POWER AMP
19P PRE CD DECK
Advertisement
