Advertisement
X-E5
ADJUSTMENT
.
¢ Contents and procedure of adjustment
Manual ediusiment mode
:
(1) Adjustment of playback level of Lch of A-deck
Adjustable items and adjusting procedure
(2) Adjustment of playback level of Rch of A-deck
¢ Manually adjustable items
(3) Adjustment of playback level of Lch of B-deck
- Playback level of A-deck (L, R)
(4) Adjustment of playback level of Rch of B-deck
- Playback level of B-deck (L, R)
(5) Adjustment of recording level of Lch of B-deck
- Recording equalizer of B-deck (L, R)
(6) Adjustment of recording level of Rch of B-deck
- Recording bias of B-deck (L, R)
(7) Adjustment of recording bias of Lch of B-deck
(8) Adjustment of recording bias of Rch of B-deck
Allotment of keys
KSO <5 pin>
KS1 <6 pin>
KS2 <7 pin>
Lowering of
Deletion of each
KRO <3 pin>
STOP
adjustment
adjustment
value ( 4
)
item (N/DUBB)
Change of
adjustment
item (DOLBY)
Resetting
KR2 <1 pin>
AB
RWD
"TEST 1
(CCRS/CRLS)
Upper of
Saving of all
KR3 <4 pin>
adjustment
adjustment
( pp )
items (H/DUBB)
<
> : CN9(X28: A/6)
( ) : Keys of receiver used in normal mode
When
performing this operation, press the keys of
the receiver having the names of the above keys used
in the normal mode.
For example, since the [dolby] key is used as the key
for change of adjustment item in the normal mode, the
[DOLBY] key of the receiver is used for this purpose.
Since data cannot be output in series for the adjust-
ment in the system mode, the adjustment value is indi-
cated by the counter of the receiver.
Set the selector
of the receiver to TAPE at this time, however.
* In the unit mode, short the pins of CN9.
(Examples) :
- For change of an adjustment item, short No. 2 and
No. 7 of CN9 to each other.
- For heightening of an adjustment value, short No. 4
and No. 6 of CN9 to each other.
: For lowering of an adjustment value, short No. 3 and
No. 6 of CNQ to each other.
28
Advertisement
