Advertisement
2-2. Pin function
Pin name
X-E5
CIRCUIT DESCRIPTION
Function
ERASE
(PF3)
© Port for turning on/off ERASE head. ¢ Turned on only in REC operation.
H: ON, L : OFF
(PF4)
7
CPMA
(PD1)
CSPA
(PD2)
1
nN
14-17
(PC4
| 14-17 _|
PHA
PHB
= ©
SOLA
(PDO) ree
O
SOLB
(
PD3)
O
(PD4)
O
13
7OHSP
(PD7)
O
|
(PCO~PC3)
)
nN oO
REC MUTE
LINE MUTE
(PC6)
(PC7)
i)
¢ Port for LED on left side of Amechanism reel shaft.
© Lights up when power is turned on.
Flashes while mechanism is in operation, however.
H : Lighting up, L : Going off
© Port for LED on right side of A-mechanism reel shaft.
¢ Lights up when power is turned on.
Flashes while mechanism is in operation, however.
H : Lighting up, L : Going off
¢ Port for LED on left side of B-mechanism reel shaft.
¢ Lights up when power is turned on.
Flashes while mechanism is in operation, however.
H : Lighting up, L : Going off
¢ Port for LED on right side of B-mechanism reel shaft.
¢ Lights up when power is turned on.
Flashes while mechanism is in operation, however.
H : Lighting up, L : Going off
Port for turning on/off A-mechanism solenoid. ¢ Condition of mechanism is changed by changing
length of time while this port is set to H level. Turned on only during transition.
H : ON, L: OFF
© Port for turning on/off A-mechanism capstan motor.
¢ Mechanism is in operation, this port is
kept at H level. Capstan motor is turned off only when mechanism is stopped.
H : ON, L: OFF
© Port for speed control of Aemechanism capstan motor.
¢ While this port is at L level, capstan
motor turns at double normal speed. Set to L level only while high-speed dubbing and transition of
mechanism.
H: Normal, L : Double speed
Port for turning on/off B-mechanism solenoid. ¢ Condition of mechanism is changed by changing
length of time while this port is set to H level. Turned on only during transition. H : ON, L : OFF
¢ Port for turning on/off B-mechanism capstan motor.
* Mechanism is in operation, this port is
kept at H level. Capstan motor is turned off only when mechanism is stopped.
H : ON, L: OFF
¢ Port for speed control of B-mechanism capstan motor.
¢ While this port is at L level, capstan
motor turns at double normal speed.
Set to H level only while except high-speed dubbing and
transition of mechanism.
H: Normal, L : Double speed
¢ Port for changing normal playback equalizer.
© Turned on while chromium tape is played nor-
mally. Default is OFF and bias of 120us is applied. H : ON (70ps), L : OFF (120s)
* Port for changing double-speed playback equalizer. ¢ Turned on while chromium tape is played
at double-speed.
Default is OFF and bias of 120s is applied. H: ON (70s), L : OFF (120ps)
e Unused terminals.
* Photo-sensor input port of A-mechanism.
® Light is applied to reflector at rear of reel stand.
H/L is judged by reflected light to sense running of tape and use result for counter.
e Running of tape is sensed at both edges.
Counter counts one every four senses.
¢ Photo-sensor input port of B-mechanism.
® Light is applied to reflector at rear of reel stand.
H/L is judged by reflected light to sense running of tape and use result for counter.
e Running of tape is sensed at both edges. Counter counts one every four senses.
¢ Mute just before REC EQ. ¢ Turned off only during REC operation.
H : OFF, L: ON
e Mute at LINE OUT of playback system.
¢ Turned off only during playback and recording opera-
tion, including transition time of mechanism.
H: OFF, L: ON
KRO~KR3
KSO-~KS3
-|o
EXTAL
(EXTAL)
XTAL
(XTAL)
34
Ww (oa)
TEX
(TEX)
AVand
(AVGND)
O
|
© Key return port for test mode.
© Key is taken through this port to realize test mode with key of
body.
® Key scan port for test mode.
¢ Key is taken through this port to realize test mode with key of
body. * TSCN3 composes short matrix of test mode.
Reset terminal of device.
¢ Terminal for oscillation of device. * 10 MHz is connected.
© Terminal for oscillation of device. ¢ 10 MHz is connected.
© Grounding terminal.
© Terminal for sub-oscillation of device. ¢ Unused.
¢ Terminal for sub-oscillation of device. ¢ Unused
¢ Terminal for ground level of A/D conversion. ® Generally, potential of Vss is input.
AVREF
(AVREF)
LEVEL L
(PAO)
LEVEL R
(PA1)
E'-PROM DT
(PA2)
ie)
W)1@
wo i
|
0
¢ Terminal for upper level of A/D conversion.
* Generally, potential of VoD is input.
Port for detection of L-channel signal level of tape. * A/D conversion is performed to detect level.
© Port for detection of R-channel signal level of tape.¢ A/D conversion is performed to detect level.
@ Port for reading and writing data of E-7PROM. e All data which deck must save are written in this
IC.
13
Advertisement
