Advertisement
Quick Links
Desk Shelf
Model 401-1022, 401-1040
Full product specifications: www.humancentric.com/401-1022; www.humancentric.com/401-1040;
Need help? Contact support: support@humancentric.com
To reduce the risk of injury to persons, read all important precautions and warnings listed below.
HumanCentric assumes no responsibility for personal injury or property damage sustained by or through
the use of this product:
1. Read all instructions carefully.
2. Incorrect installation may lead to damage or serious injury. Ensure the product is secured before use.
3. When placing this product on your desk, make sure it is sturdy enough to support the weight of the
stand and the items placed on it.
4. This product contains small items that can be choking hazard if swallowed. Keep these items away
from children.
PARTS INCLUDED
(B) Leg, No Notches (x1)
*Not included in Small size
Desk Shelf
© 2023 HumanCentric Ventures LLC
(A) Main Shelf (x1)
*Size will vary based on
Small / Medium / Large
Desk Shelf
(C) Leg, Right Notches (x1)
WARNING
(D) Leg, Left Notches (x1)
www.humancentric.com/patents
(E) Lower Shelf (x1)
or
(F) 2.5mm Hex Key or
T15 Torx Key (x1)
or
(G) Machine Screws or
Wood Screws (x4-6) (x4-6)
(H) Leveling Feet (x4)
www.humancentric.com
Advertisement
Related Manuals for HumanCentric 401-1022
Summary of Contents for HumanCentric 401-1022
- Page 1 WARNING To reduce the risk of injury to persons, read all important precautions and warnings listed below. HumanCentric assumes no responsibility for personal injury or property damage sustained by or through the use of this product: 1. Read all instructions carefully.
- Page 2 Lower shelf on right Partially screw in the leg screws (G) into the pilot holes in the bottom of the shelf using the key (F). Leave enough space to slide the legs under the screws. © 2023 HumanCentric Ventures LLC www.humancentric.com...
- Page 3 Push the legs (C) and (D) onto the lower shelf. Flange on bottom Slide the leg keyholes onto the partially threaded screws. Confirm the front of the legs are orientated correctly with the front angled face of the shelf top. Front Angled Faces © 2023 HumanCentric Ventures LLC www.humancentric.com...
- Page 4 Lock the legs in place by tightening the screws until snug. Do not overtighten! Note: If desk surface is not level and causes the shelf to wobble, use the included bumpers (H) to shim the legs where needed. © 2023 HumanCentric Ventures LLC www.humancentric.com...
Need help?
Do you have a question about the 401-1022 and is the answer not in the manual?
Questions and answers