Pioneer SX-303R Operating Instructions Manual

STEREO RECEIVER
5X-303R
S×-253R
5X-203
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe place
for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting-
and operating the unit is the same.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian models]
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED)PLUG WITH AN EXTENSION CORD, RECEP-
TACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS
UTILISER CETTE FICHE POLARISEE AVEC UN PROLON-
GATEUR UNE PRISE DE COURANT OU UNE AUTRE SOR-
TIE DE COURANT, SAUF Sl LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
TWO VOLTAGE SELECTOR SWITCHES
Only multi-voltage models are provided with these
switches. U.S. Canadian models are not provided with
these switches.
Main voltages in Saudi Arabia are 127 V and 220 V only. Never
use this model with 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel. Before
your model is shipped from the factory, these switches are set to
the power requirements of the destination. Check that they are
set properly before plugging the power cord into the AC outlet. If
the voltage is not properly set or if you move to an area,where the
voltage requirements differ, adjust the selector switches as
follows.
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. insert the screwdriver into the groove on the voltage selec-
tors and adjust so that the tip of the allow points to the vol-
tage value of your area.
ilov izo. izTv
Set the voltage selector switch to the voltage in your area
(only SX-303R).
i =ov zzov
I ZO- I ZTv -_ r" 240v
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to oprerate the equipment.
CONTENTS
CHECKING ACCESSORY ITEMS .................................... 3
CONNECTIONS ............................................................ 3
REAR PANEL FACILITIES ............................................. 5
FRONT PANEL FACILITIES ............................................. 6
REMOTE CONTROL UNIT FACILITIES ........................... 8
SETTING THE UNIT PRIOR TO OPERATION ..................... 9
GRAPHIC EQUALIZER CONTROLS ................................. 9
LISTENING TO THE BROADCAST ................................. 9
DIRECT ACCESS TUNING .......................................... 10
PRESET TUNING ......................................................... 1 1
TO LISTEN TO OTHER MUSIC SOURCES ............... ,...... 13
TAPE RECORDING ....................................................... 13
TROUBLESHOOTING ................................................... 14
SPECIFICATIONS ...................................................... 1 5
PIONEER
The Art of Entertainment