www.ti.com
3.4 Launching the OPT4001EVM Software
With the OPT4001YMNEVM properly connected, launch the Latte EVM GUI software from the Windows Start
menu. The software launches with a screen similar to that shown in
If the message shown in
that the EVM motherboard was not detected. Check the USB connection and that the motherboard appears in
the device manager as shown in
from the PC and the GUI "start capture" button has not been enabled.
SBOU278 – DECEMBER 2021
Submit Document Feedback
Figure 3-11. OPT4001 Main Operation Screen
Figure 3-12
appears when the OPT4001EVM GUI software is launched, this means
Section
3.3. A green light will appear on the motherboard if it is receiving power
Figure 3-12. Hardware Error Message
Copyright © 2021 Texas Instruments Incorporated
OPT4001YMNEVM Software
Figure
3-11.
OPT4001YMNEVM User's Guide
13