Advertisement
SAFER PLUG
®
53
This product is equipped with a Safer
Plug
®
; an advanced safety device
that helps detect electrical fires
caused from faulty outlets.
Overloading of outlets, adapters
and surge protectors may cause
overheating, damage, and increase
®
risk of fires. Safer Plug
continuously
monitors the temperature in the
plug and outlet and will turn off
the heater to prevent unsafe outlet
overheating.
If the Safer Plug
®
cuts the power
due to unsafe conditions it will show
an "
"message on the screen.
If this occurs the Safer Plug
prevented a potentially unsafe
condition.
To reset the device if this occurs, first
allow the plug to cool down. Once
the plug has cooled down, unplug
the device and wait 5 seconds, then
plug back in and continue to use
normally.
If the Safer Plug
®
continues to
activate your outlet may be faulty.
Check your heater cord and
plug connections. Faulty wall
outlet connections or loose plugs
can cause the outlet or plug to
overheat. Be sure the plug fits tight
in the outlet. Heaters draw more
current than small appliances, so
overheating of the outlet may occur
even if it has not occurred with the
use of other appliances. During use,
check frequently to determine if your
plug, outlet or faceplate is HOT! If so,
discontinue use of the heater and
have a qualified electrician check
and/or replace the faulty outlet(s).
28WM7145 REV1.0
®
has
Advertisement
