Table of Contents
Advertisement
IL.UIIIIUUtlIly
d
IL;dlIII_UIUI;!
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable (one S-video cable for an S-VHS camcorder)
Camcorder
Note:
Ifyou have an S-VHS camcorder, the picture
quality will increaseffyou use an S=video
cable (in the Swideojacks) instead of a
regular video cable.
Do not connect both a regular video cable
and an S=videocable to at the same time.
TV
Connecting an audio system
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers. (See"Turning off the built-in speakers"
on page 45.)
You will need:
• one pair of audio cables
Note:
Tohear sound when using an externalaudio
amplifier, the volume of both the TVand
amplifier must be set above 0 (zero).
For example,if the volume of the TVis set
to O, y ou will not be able to hear any sound,
even ff the volume of the amplifier is at its
highest level
Amplifier
TV
From Cable, Cable Box
or Antenna
32/36AFX61 (E)
9
Advertisement
Table of Contents
