Table of Contents
Advertisement
Watching picture-in-picture
CPIP}
The picture-in-picture
(PIP) feature allows you to watch two pictures
at the same time. The smaller picture can come from a TV broadcast
or an external source, such as a VCR.
To display a TV broadcast as a small picture:
1. Turn on the TV and select the program you want to watch.
2. Press PIP once to display a small picture. A window 119 the size
of the screen will appear. Press PIP a second time to display a
1/16-size window.
3. Press PIP CH • • to choose the program you want to be
displayed as a small picture.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds the rating limits you set, the TV will enter
into the program block mode. See "Using the V-CHIP menu" on
page 32.
PIP
SOURCE
PIP CH ,&V
PIP
24
BLOCKED
To display a picture from an external source as a small picture:
1. Make sure you have connected the external source equipment
properly. For more information, see the "Connecting your TV"
on page 5.
2. Turn on the TV and select the program you want to watch.
3. Press PIP once to display a small picture. A window 1/9 the size
of the screen will appear. Press PIP a second time to display a
1/16-size window.
.
Repeatedly press SOURCE to select the input source (VIDEO 1,
VIDEO 2, or VIDEO 3) for the small picture. The selected
source will be displayed in purple. ColorStream cannot be
selected.
5. You can play a tape as the small picture or select a channel for the
small picture using the VCR's channel button.
Note:
• PIP cannot be turned on when the
ColorStream input is being viewed.
• Youcannot display the signal sources input
through the ANT-2 terminal asa small
picture.
• Youcan choose to hear the sound of either
the main or PIPpicture (see "Selecting the
audio out sound" on page 45).
PIP
SOURCE
SELECT_
TV
VIDEO
1
VIDEO
2
VIDEO
3
SOURCE:TO
SELECT
To turn PIP off:
Press PIP once or twice, depending on the size of the small
picture screen you selected.
28
32/36AFX61(_
Advertisement
Table of Contents
