Connecting Two Vcrs; Connecting A Camcorder - Toshiba COLORSTREAM 32HFX71 Owner's Manual

Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono
VCRs)
• two video cables (two S-video cables for S-VHS VCRs)
VCR1
From Antenna
TV
Caution:
Theunauthorized recording of television
programs, videotapes,and other materials
may infringe upon the provisionsof copyright
laws.
Note:
If you have S-VHS VCRs,use S-video cables
instead of regular video cables.Do not
connect both a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time.
Do not connect the same VCR to the output
and inputjacks on the TVat the same time.
Todub or edit, VCR 2 mustselect Line IN,
and the TVmust select Video-1.
* The VideoOUTjack doesnot output the
PIPpicture.
** TheAudio OUTjacks can output the sound
of either the Main or PIPpicture (see
"Selectingthe Audio OUT sound" on page
49).
VCR2
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable (one S-video cable for an S-VHS camcorder)
Camcorder
Caution:
If you have an S-VHS camcorder, use an
S-video cable between the S-videojacks on
the camcorder and TV Do not connect both
a regular video cable and an S-video cable at
the same time.
10
Video-3 (front panel)