Table of Contents
Advertisement
(Continued
j_om previous page)
From Antenna
Stereo VCR
DVD Player with ColorStream
TM
Note:
For the highest possiblepicture quali_ you must use
the ColorStream (component video) connections between
the TVand DVD player Connect the ColorStream cables
from the DVD player to the jacks marked "ColorStream"
on the TV
The ColorStream input on the TVis for use with DVD
players that offer interlaced (480/) scanning ONLY If you
have a progressive scan (480p) DVD player, you
must switch the OVO player to interlaced C480i)
mode first, and then connect it to the TV's Co/orStream
jacks. Failure to do this will cause unacceptable
picture performance.
Connection of a high definition set-top receiver box is
permitted only if the output is switched to the interlaced
(480/) scan mode. This TV will not accept or display
progressive scan (480p/720p)
signals or 1080i
interlaced high definition signals.
Ifyour DVD player is not component video compatible,
use the S-video connections (both audio and video)
instead of the ColorStream connections.
Do not connect both S-video and ColorStream cables
between the TVand DVD player at the same time. Doing
so will distort the picture.
Torecord, set the VCRto Line IN. Tomonitor recording,
set the VCRto Line IN and the TVto Video-l.
Connecting
two VCRs
This connection
allows you to record
(dub/edit)
from one VCR to
another
VCR while watching
a videotape.
You can also record from
one TV channel
while watching
another
channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono
VCRs)
• two video cables (two S-video cables for S-VHS VCRs)
VCR 1
From
3 2/3 6AFX6 ] (E)
The unauthorized recording, use,
distribution,or revision of television
programs,videotapes, DVDs, and other
materials is prohibited under the
CopyrightLaws of the United States
and other countries,and may subject
you to civil and criminal liability.
Note:
Do not connect the same VCR to the output
and inputjacks on the TVat the same time.
ff you have S-VHS VCRs,use S-video cables
(in the S-videojacks) instead of regular video
cables.Do not connect both a regular video
cable and an S-video cable to Video-7 (or
Video-2) at the same time.
Todub or edit, VCR 2 mustselect Line IN,
and the TVmust select Video-7.
* TheAudio OUTjacks can output the sound
of either the Main or PIPpicture (see
"Selectingthe Audio OUTsound" on page
45).
** The VideoOUTjack doesnot output the
PIPpicture.
Advertisement
Table of Contents
